9I果冻制作厂

　　雨棚支架80度与80角是否相同

　　Is the 80 degree and 80 degree angle of the canopy bracket the same

　　结论与解释

　　Conclusion and Explanation

　　不是一个概念。行业里“80°”通常指雨棚顶板的倾斜角度（坡度）；而“80角”多半指型材的规格型号，如“80×80 角钢/铝型材”或“80 mm 支架截面边长/高度”。两者分别描述“角度”和“尺寸”，不能互换。

　　It's not a concept. In the industry, "80 °" usually refers to the inclination angle (slope) of the canopy roof; And "80 angle" mostly refers to the specification and model of the profile, such as "80 × 80 angle steel/aluminum profile" or "80 mm bracket section edge length/height". The two describe "angle" and "size" separately and cannot be interchanged.

　　常见含义对照

　　Common meanings comparison

　　写法常见含义单位适用场景备注

　　Common meanings of writing, applicable scenarios, and notes

　　80°顶棚倾斜角度（坡度）度（°）设计排水、采光、抗风例如膜结构雨棚常建议坡度约5°–15°；也有结构将合理倾角做到约26°34′–45°

　　80 ° ceiling tilt angle (slope) degree (°) is recommended for designing drainage, lighting, and wind resistance. For example, membrane structure canopies are often recommended to have a slope of about 5 ° -15 °; There are also structures that can achieve a reasonable inclination angle of about 26 ° 34 ′ -45 °

　　80角型材规格“80×80”或“边长/高度约80 mm”mm 或无量纲指支架/框架型材尺寸不等同于80°；下单需明确是等边还是不等边、壁厚、材质等

　　The specification of the 80 angle profile is "80 × 80" or "side length/height is about 80 mm" mm or dimensionless, indicating that the size of the bracket/frame profile is not equivalent to 80 °; When placing an order, it is necessary to specify whether it is equal or unequal, wall thickness, material, etc

　　上述“80°”的坡度建议与“26°34′–45°”倾角示例，分别来自不同结构雨棚的设计实践；“80角”的叫法多见于型材规格描述。

　　The recommended slope of "80 °" and the example of "26 ° 34 ′ -45 °" inclination angle mentioned above are from the design practices of different structural canopies; The term '80 degrees' is commonly used in the description of profile specifications.

　　快速判断你遇到的是哪一个

　　Quickly determine which one you have encountered

　　看图纸/清单标注：标注“∠80°”“坡度1:…”“α=80°”多为角度；标注“L80×80×t”“80×80 铝型材”“截面80 mm”多为尺寸。

　　Refer to the drawings/list annotations: "∠ 80 °", "Slope 1:...", "α=80 °" are mostly angles; The annotations "L80 × 80 × t", "80 × 80 aluminum profile", and "section 80 mm" are mostly dimensions.

　　看单位：带“°”是角度；带“尘尘”或“×”多为尺寸。

　　Look at the unit: with "°" is the angle; Dimensions marked with "mm" or "x" are often used.

　　看用途：涉及“排水/采光/抗风设计”多为角度；涉及“型材选型/连接孔位/截面参数”多为尺寸。

　　Usage: It involves "drainage/lighting/wind resistance design" from various angles; The selection of profiles/connection hole positions/section parameters mostly involve dimensions.

　　选型与沟通建议

　　Selection and communication suggestions

　　若说的是角度：先确定功能需求。一般屋面/雨棚为快速排水，坡度常取约5°–15°；若兼顾其他结构或造型，可能做到约26°34′–45°。明确“80°”是否指坡度，以及该角度是否满足排水与结构要求。

　　If we're talking about perspective: first determine the functional requirements. The general roof/canopy is designed for quick drainage, with a slope of approximately 5 ° -15 °; If other structures or shapes are taken into account, it is possible to achieve an angle of approximately 26 ° 34 ′ -45 °. Clarify whether "80 °" refers to slope and whether this angle meets drainage and structural requirements.

　　若说的是尺寸：不要只说“80角”，请完整给出“80×80×迟（尘尘）、材质（如蚕235/铝合金）、是否等边、表面处理（如热镀锌）、孔位与配件规格”，以免与角度混淆导致错配。

　　If you are talking about size: don't just say "80 degrees", please provide the complete "80 × 80 × t (mm), material (such as Q235/aluminum alloy), whether it is equal or not, surface treatment (such as hot-dip galvanizing), hole position and accessory specifications" to avoid confusion with angle and mismatch.

　　本文由  济南雨棚  友情奉献.更多有关的知识请点击&苍产蝉辫; /   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is dedicated by Jinan Rainshed Friendship For more related knowledge, please click / Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.